Open Enrollment
-
Open Enrollment $3,000.00Abaqus/CAE: Geometry Import and Meshing (2 day)
Real-world engineering commonly involves the analysis and design of complicated geometry. These types of analysis depend critically on having a modeling tool with a robust geometry import capability in conjunction with advanced, easy-to-use mesh generation algorithms. This course provides an in-depth look at several advanced Abaqus/CAE capabilities: CAD geometry import and repair, meshing and partitioning of complicated geometry. Both native and neutral geometry formats are discussed. An in-depth treatment of meshing techniques is also provided, including the use of virtual topology to ease the meshing of complicated geometry in the presence of small geometric features. The course consists of lectures, demonstrations and workshops.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00Analysis of Composite Materials with Abaqus (3 day)
Composite materials are used in many design applications because of their high stiffness-to-weight ratios. This course shows you how to use Abaqus effectively to model composite materials.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00Analysis of Geotechnical Problems with Abaqus (2 day)
This course provides an overview of modeling geotechnical problems with Abaqus, including issues related to experimental testing, calibration of constitutive models and coupling between fluid flow and stress/deformation in the analysis of porous media. Modeling issues related to geotechnical problems are addressed and numerous illustrative examples are examined.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00CST Studio Suite – EDA / SI-PI (1 day)
This course describes and demonstrates how to use CST for Signal Integrity/high speeds technology. The course will go over some fundamentals of how to set-up and run an electromagnetic simulation – it will take the viewpoint of how to do this for electronics applications and spends a good amount of time on features and tools that are helpful and specific for this area.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00CST Studio Suite – EMC/EMI (1 day)
This course covers the EMC Module providing an overview on how simulation can be applied towards electromagnetic compatibility (EMC) design and analysis for emissions and immunity, conducted and radiated.
Please select a date and enter the number of attendees below, before adding to cart
-
Open Enrollment $3,000.00CST Studio Suite – Microwave and Antenna (1 day)
Throughout this course you will become familiar with the high frequency solvers used to simulate different type of antennas. This course will also discuss more specific topics like antenna matching network and SAR calculations in the human body.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open EnrollmentFitness-for-Service Analysis with Abaqus (2 day)
This three-day course covers all main aspects of the finite element modelling process for electromagnetic devices within Opera-3d, and is aimed at providing sufficient information and hands-on experience to put you on track to successfully analyze your own devices.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $625.00Fluid Simulation Essentials (2 day)
This course is a comprehensive introduction to fluid mechanics simulation in the 3DEXPERIENCE Platform. In this course, you will learn how to solve computational fluid dynamics (CFD) problems, including steady-state internal and external flow and Conjugate Heat Transfer (CHT) through the Creation and Fluid Scenario apps. The course is divided into lectures and workshops.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $625.00Introduction to CST Studio Suite (1 day)
Throughout this course you will become familiar with the CST Studio Suite interface and how to perform basic tasks in terms of modeling, setup of simulation, and analyzing pre and postprocessing results. This course will also briefly discuss the various high frequency solvers available in CST Microwave Studio and provide a behind-the-scenes look at the FIT and FEM algorithms.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open EnrollmentIntroduction to fe-safe (2 day)
Durability is a requirement for product creation in many industries, because cycling loads can cause damage much sooner than a static load. This course introduces fatigue life calculations in fe-safe and gives you an understanding of how to configure a fatigue analysis based on FEA solutions. These life results can be used to iterate on a design and improve the overall durability of the design. The course is divided into lectures and workshops. The course’s workshops are integral to the training. They are designed to reinforce concepts presented during the lectures. They are intended to provide users with the experience of running and trouble-shooting actual fatigue analyses.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $625.00Introduction to Opera-3d (3 day)
This three-day course covers all main aspects of the finite element modelling process for electromagnetic devices within Opera-3d, and is aimed at providing sufficient information and hands-on experience to put you on track to successfully analyze your own devices.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00Metal Inelasticity in Abaqus (2 day)
Properly modeling the inelastic behavior of materials is very important when evaluating the performance of a design in critical loading situations. This course provides a brief overview of the inelastic behavior observed in metals and the basic concepts of plasticity theory. The course shows Abaqus users how to model various forms of metal plasticity using a combination of examples and workshops to demonstrate the material models and the type of experimental data necessary to calibrate them. The assumptions and limitations of the various plasticity and creep models are also discussed.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00Modeling Rubber and Viscoelasticity with Abaqus (2 day)
Rubber and resilient foam are widely used for a variety of applications, such as seals and gaskets, shock mounts, vibration isolators and tires. The mechanical and chemical properties of these materials allow them to act as excellent seals against moisture, pressure and heat. They also have excellent energy absorption and dissipation capabilities. This course provides a brief overview of finite deformations and the material models available in Abaqus which are used for rubber and resilient foam.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $625.00Process Composer Essentials (1 day)
Automation Process Composer and Optimization Process Composer apps are apps for authoring simulation processes on the 3DEXPERIENCE platform. Such simulation processes can be used to automate simulations and capture best practices to distribute to other users in your organization. Optimization Process Composer also enables design space exploration with DOE and Optimization or reliability calculations including Monte Carlo simulation. This course is intended for users of either app. Features unique to the Optimization Process Composer app are covered in optional contents. You can choose the lessons and workshops that are useful for the role(s) assigned to you.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open EnrollmentStructural Scenario Creation Essentials (1 day)
This introductory course introduces you to the analysis capabilities of Abaqus using the Abaqus keywords interface. It is the ideal way for those who will primarily use third-party preprocessors to obtain a working knowledge of both Abaqus/Standard and Abaqus/ Explicit to solve linear and nonlinear problems. The following products are covered: Abaqus/Standard, Abaqus/Explicit and Abaqus/Viewer. If interested in the interactive interface of Abaqus, consider the Introduction to Abaqus course instead.
Please select a date and enter the number of attendees below, before adding to cart.
-
Open Enrollment $3,000.00Substructures and Submodeling with Abaqus (2 day)
The size and complexity of designs that are analyzed and tested with Abaqus continues to grow. Substructures and submodeling are two effective techniques that allow the analyst to study problems that are too large to simulate with a conventional modeling approach. Substructures are useful to break a large problem into several smaller components. Submodeling allows the analysts to successively focus in on the area of interest.
Please select a date and enter the number of attendees below, before adding to cart.